#ad
Quartz Clock Movement Kit with 3″ Black Spade Hands for Dials up to 3/16
#ad - Aa battery required. Movement is suitable for clock repair, restoration or clock making. This quartz movement features accurate and dependability timekeeper (accurate to +/- one second per day), movement size 2 7/32″ square 5/8″ thick and fits in a 3″ diameter hole. The shaft diameter measures 5/16″. American engineering and quality made in china. Clock movement maximum dial thickness 3/16″. A pair of hands included 3″ as shown.
#ad
Quartz clock movement Kit,Sumilulu Quartz Clock Movement Mechanism DIY Repair Parts with Hands (A)
#ad - Package content 1 x quartz clock movement — 1 x second hand –1 x minute hand — 1 x hour hand — 1 x screw — 1 x washer — 1 x plastic washer. Mute and high accuracy. Suitable for clock panel with a thickness not more than 6 mm. Quartz clock movement mechanism repair tool. Great for repairing, replacing or making a clock.
#ad
Dhorcas (#20) 3/16″ Threaded Motor and Straight Black 10″ Hands, Quartz Clock Movement Kit and Replacement Motor
#ad - Also comes with an instruction sheet. If you need a longer shaft then visit our other listings this kit also includes a black metal hour and minute hands (no second hand). Hour hand length (from the shaft hole) 6 1/2in. One #6262 high torque quartz clock movement/motor with a total shaft length of 1/2″, and a threaded shaft of 1/4″, therefore, we suggest that the thickness of your dial or clock’s face cannot be more than 3/16″ so there will be enough space to screw the nut unto the shaft to hold your dial/face in place. Second hand none only a brass cap. Minute hand length (from the shaft hole) 9 3/4in. Requires one aa battery to operate (not included). The hands have a straight contemporary design, very light metal, and comes with a plastic protection film that you peel off.
#ad
Quartz clock movement Kit,Sumilulu Simple Gold Hands DIY Quartz Wall Clock Movement Mechanism Replacement
#ad - Package content 1 x quartz clock movement — 1 x second hand –1 x minute hand — 1 x hour hand — 1 x screw — 1 x washer — 1 x plastic washer. Suitable for clock panel with a thickness not more than 6 mm. Mute and high accuracy. Great for repairing, replacing or making a clock. Quartz clock movement mechanism repair tool.
#ad
Dhorcas (#20) 1/4″ Threaded Motor and Straight Black 10″ Hands with hanger, Quartz Clock Movement Kit and Replacement Motor
#ad - One #6262 high torque quartz clock movement/motor with a total shaft length of 1/2″, and a threaded shaft of 1/4″, therefore, we suggest that the thickness of your dial or clock’s face cannot be more than 3/16″ so there will be enough space to screw the nut unto the shaft to hold your dial/face in place. The hands have a straight contemporary design, very light metal, and comes with a plastic protection film that you peel off. Hour hand length (from the shaft hole) 6 1/2in. Also comes with an instruction sheet. Minute hand length (from the shaft hole) 9 3/4in. Requires one aa battery to operate (not included). Second hand none only a brass cap. If you need a longer shaft then visit our other listings this kit also includes a black metal hour and minute hands (no second hand) and a metal hanger to hang your clock on the wall.
#ad
Quartz Clock Movement Kit with 1 Set of Hands and Second Hand, for Dials up to 1/4″ Thick
#ad - This an accurate dependable american made movement, i installed one of these movements in a clock of mine and 10 years later it is still going movement specifications case size 2-1/8″w x 2-1/8″h x 5/8″d. Hand specifications minute hand-3″ hour hand-2 3/8″. Minute hand shaft is 11/16″ overall and the threaded shaft is 7/16″. Shaft diameter 5/16″ (8mm) motor self-start, 1 second step.
#ad
Quartz Clock Movement Kit with 1 Set of Hands and Second Hand, for Dials up to 1/8″ Thick
#ad - Shaft diameter 5/16″ (8mm) motor self-start, 1 second step. This an accurate dependable american made movement, i installed one of these movements in a clock of mine and 10 years later it is still going movement specifications case size 2-1/8″w x 2-1/8″h x 5/8″d. Hand specifications minute hand-3 1/8″ hour hand-2 1/4″. Minute hand shaft is 9/16″ overall and the threaded shaft is 5/16″.
#ad
Quartz Clock Movement Kit with 1 Set of Hands and Second Hand, for Dials up to 3/8″ Thick
#ad - Hand specifications minute hand-3″ hour hand-2 1/4″. Shaft diameter 5/16″ (8mm) motor self-start, 1 second step. This an accurate dependable american made movement, i installed one of these movements in a clock of mine and 10 years later it is still going movement specifications case size 2-1/8″w x 2-1/8″h x 5/8″d. Minute hand shaft is 13/16″ overall and the threaded shaft is 9/16″.
#ad
Dhorcas (#20) 1/2″ Threaded Motor and Straight Black 10″ Hands with hanger, Quartz Clock Movement Kit and Replacement Motor
#ad - Also comes with an instruction sheet. Minute hand length (from the shaft hole) 9 3/4in. Second hand none only a brass cap. Hour hand length (from the shaft hole) 6 1/2in. Requires one aa battery to operate (not included). One #6262 high torque quartz clock movement/motor with a total shaft length of 3/4″, and a threaded shaft of 1/2″. The hands have a straight contemporary design, very light metal, and comes with a plastic protection film that you peel off. If you need a longer shaft then visit our other listings this kit also includes a black metal hour and minute hands (no second hand) and a metal hanger.
#ad
Dhorcas (#03) 1/2″ Threaded Long Shaft Motor with Black 6″ Hands, Quartz Clock Movement Kit for Replacement
#ad - Also comes with an instruction sheet. The second hand has a gold center for a decorative touch. One quartz clock movement/motor kit #6262 with a total shaft length of 3/4″, and a threaded shaft of 1/2″. Second hand length 7. If you need a longer shaft then visit our other listings. 60in (from the shaft hole) 3 3/4in. Minute hand length 6. 67in (from the shaft hole) 5in. Hour hand length 4. 38in (from the shaft hole) 5 1/2in. This kit also includes black metal hour, minute and second hands that are longer than the average hands usually sold with this kit. Requires one aa battery to operate (not included).
#ad
Quartz Clock Movement Kit with 1 Set of Hands and Second Hand, for Dials up to 1/4″ Thick
#ad - Hand specifications minute hand-3″ hour hand-2 1/4″. Minute hand shaft is 11/16″ overall and the threaded shaft is 7/16″. This an accurate dependable american made movement, i installed one of these movements in a clock of mine and 10 years later it is still going movement specifications case size 2-1/8″w x 2-1/8″h x 5/8″d. Shaft diameter 5/16″ (8mm) motor self-start, 1 second step.
#ad
Quartz Clock Movement Kit with 1 Set of Hands and Second Hand, for Dials up to 1/8″ Thick
#ad - Hand specifications minute hand-3″ hour hand-2 1/4″. This an accurate dependable american made movement, i installed one of these movements in a clock of mine and 10 years later it is still going movement specifications case size 2-1/8″w x 2-1/8″h x 5/8″d. Shaft diameter 5/16″ (8mm) motor self-start, 1 second step. Minute hand shaft is 9/16″ overall and the threaded shaft is 5/16″.
#ad
Quartz Clock Movement Kit with 1 Set of Hands and Second Hand, for Dials up to 1/2″ Thick
#ad - Minute hand shaft is 15/16″ overall and the threaded shaft is 11/16″. This an accurate dependable american made movement, i installed one of these movements in a clock of mine and 10 years later it is still going movement specifications case size 2-1/8″w x 2-1/8″h x 5/8″d. Hand specifications minute hand-3″ hour hand-2 3/8″. Shaft diameter 5/16″ (8mm) motor self-start, 1 second step.
#ad
Dhorcas (#01) 1/2″ Threaded Motor and Curvy Long 9″ Hands with Hanger, Quartz Clock Movement Kit for Replacement
#ad - Threaded shaft 1/2″, total shaft length 3/4″ works with dials up to 7/16″ thick. Metal hanger included with this kit hands are light metal can be cut with any household scissors. Fast shippingmotor is mute/quiet, smooth sweep motion, no tick tock. Shaft diameter is 1/4″ make your shaft hole at least 3/8″. Motor size 2 2/16″ x 2 2/16″ x 5/8″.
#ad
Quartz Clock Movement Kit with 1 Set of Hands and Second Hand, for Dials up to 1/4″ Thick
#ad - Hand specifications minute hand-2 1/16″ hour hand-1 9/16″. This an accurate dependable american made movement, i installed one of these movements in a clock of mine and 10 years later it is still going movement specifications case size 2-1/8″w x 2-1/8″h x 5/8″d. Minute hand shaft is 11/16″ overall and the threaded shaft is 7/16″. Shaft diameter 5/16″ (8mm) motor self-start, 1 second step.
#ad
Dhorcas (#014) 1/2″ Threaded Motor and Long 12″ Hands, Quartz Clock Movement Kit for Replacement
#ad - This is a continuous motion high torque movement, no stepping/advancing of gears, super quiet. If you need a longer shaft then visit our other listing this kit also includes a black metal hour and minute hands (no second hand, only a brass cap). Also comes with an instruction sheet. Requires one aa battery to operate (not included). One #6262 high torque quartz clock movement/motor with a total shaft length of 13/16″, and a threaded shaft of 1/2″. The hands have a lovely straight and elegant design, very light metal, and comes with a plastic protection film that you peel off.
#ad
Quartz Clock Movement Kit with 1 Set of Hands and Second Hand, for Dials up to 1/2″ Thick
#ad - Hand specifications minute hand-2 1/16″ hour hand-1 9/16″. This an accurate dependable american made movement, i installed one of these movements in a clock of mine and 10 years later it is still going movement specifications case size 2-1/8″w x 2-1/8″h x 5/8″d. Minute hand shaft is 15/16″ overall and the threaded shaft is 11/16″. Shaft diameter 5/16″ (8mm) motor self-start, 1 second step.
#ad
Quartz Clock Movement Kit with 1 Set of Hands and Second Hand, for Dials up to 1/8″ Thick
#ad - Shaft diameter 5/16″ (8mm) motor self-start, 1 second step. Minute hand shaft is 9/16″ overall and the threaded shaft is 5/16″. Hand specifications minute hand-3″ hour hand-2 3/8″. This an accurate dependable american made movement, i installed one of these movements in a clock of mine and 10 years later it is still going movement specifications case size 2-1/8″w x 2-1/8″h x 5/8″d.
#ad
Dhorcas (#01) 1/4″ Threaded Motor and Curvy Long Black 9″ Hands, Quartz Clock Movement Kit and Replacement Motor
#ad - If you need other shafts then visit our other listings we have 1/4″ and 3/4″ shafts. Hour hand length 10in (from the shaft hole) 6in. Second hand none only a brass cap. Also comes with an instruction sheet. This motor is strong enough to push longer hands, works with our hands up to 14″ long. Minute hand length 12in (from the shaft hole) 9in. This is a continuous motion high torque movement, no stepping/advancing of gears, super quiet. Requires one aa battery to operate (not included). This kit includes a black metal hour and minute hands (no second hand) that are longer than the average hands (see size below). One #6262 high torque quartz clock movement/motor with a total shaft length of 3/4″, and a threaded shaft of 1/2″, therefore, we suggest that the thickness of your dial or clock’s face cannot be more than 7/16″ so there will be enough space to screw the nut unto the shaft to hold your dial/face in place. Those of you with keen hearing will greatly appreciate it’s quietness. The hands have a lovely big ben clock design, very light metal, and comes with a plastic protection film that you peel off. Now you can make that large clock with this high torque quartz motor (ultra quiet) and 8-3/4″ metal balanced hands.
#ad
Quartz clock movement Kit,Sumilulu Simple Gold Hands DIY Quartz Wall Clock Movement Mechanism Replacement
#ad - Mute and high accuracy. Quartz clock movement mechanism repair tool. Suitable for clock panel with a thickness not more than 6 mm. Great for repairing, replacing or making a clock. Package content 1 x quartz clock movement — 1 x second hand –1 x minute hand — 1 x hour hand — 1 x screw — 1 x washer — 1 x plastic washer.
#ad
WINOMO Continuous Sweep Quartz Clock Movement Kit for DIY Clock Replacement
#ad - Descriptionthis item comes with a continuous, smooth sweep motion that removes any ticking noise that might distract or interrupt you. 6 1. This clock movement also features a high-torque motor that can drive up to lightweight, balanced clock hands. 63 inch(lwh). 5. Features- color as pictures shown., Material quartz. 2 0. 6 5., Easy to install and use with long service life., Clock movement are fit for 3mm-thick products. 6cm/ 2., Shaft fit for 20mm-diameter products. – silent and precise during working. 2 2. Package including1 continuous sweep quartz clock movement kit for diy clock replacement. The second hand moves smoothly around clock dial., Ergonomic design for working of highly performace., Size approx.
#ad
Seiko-SKP Quartz Clock Movement Kit with 5 1/4″ Black Spade Hands for Dials up to 1/4″
#ad - One set of hands & second hand included (minute hand measures 5″ from mounting hole to tip). Clock movement quartz with hands, second hand, and wall hanger. Threaded shaft length of 5/16″, total shaft length of 5/8″ without second hand. Max dial thinkness 1/4″. Size 2 1/8″ square.
#ad
Dhorcas Quartz Clock Movement Kit for Replacement, 3/4″ Threaded Motor and Long 6″ Hands
#ad - This kit also includes black metal hour, minute and second hands that are longer than the average hands usually sold with this kit. If you need a shorter shaft then visit our other listings. Requires one aa battery to operate (not included). The second hand has a gold center for a decorative touch. One quartz clock movement/motor kit #5168-s with a total shaft length of 1 1/16″, and a threaded shaft of 3/4″, therefore, we suggest that the thickness of your dial or clock’s face cannot be more than 11/16″ so there will be enough space to screw the nut unto the shaft to hold your dial/face in place. Also comes with an instruction sheet.
#ad
Dhorcas (#016) 3/16″ Threaded Motor and Black 3.5″ Hands, Quartz Clock Movement Kit for Replacement
#ad - This kit comes complete with black metal minute and hour hands and a red second hand, with a washer and a nut. One quartz clock movement/motor kit #5168-s with a total shaft length of 1/2″, and a threaded shaft of 3/16″, therefore, we suggest that the thickness of your dial or clock’s face cannot be more than 2/16″.
#ad
Dhorcas (#016) 3/16″ Threaded Motor and Black 3.5″ Hands and Hanger, Quartz Clock Movement Kit for Replacement
#ad - One quartz clock movement/motor kit #5168-s with a total shaft length of 1/2″, and a threaded shaft of 3/16″, therefore, we suggest that the thickness of your dial or clock’s face cannot be more than 2/16″. This kit comes complete with a metal hanger and black metal minute and hour hands and a red second hand, with a washer and a nut.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
